all types of Incubators
Benchtop Incubator
Product Specifications
The benchtop incubator is primarily designed to grow and maintain cell cultures. The incubator will keep cells at an optimal temperature, humidity and gas content by maintaining a constant and clean environment for the embryo. Incubators are temporary homes for embryos and must replicate the conditions within the human body thus reducing embryonic stress from temperature, humidity or pH change.
Technical Specifications
Storage
temperature :
-10 °C to +50 °C
Storage
humidity :
5% to 95% relative humidity non-condensing
Operating
environment :
For indoor use only
Operating
temperature :
+5 °C to +40 °C for safe operation.
Operating
humidity :
10% to 90% relative humidity non-condensing
Altitude :
up to 2000 m
Temperature
control range :
(ambient + 5 °C) to 40 °C.
Temperature
measurement
accuracy :
± 0.2 °C
Temperature
control
accuracy :
± 0.1 °C measured after any transient effects due to set-point changes have subsided.
Flow
control range :
0 ml/minute to 900 ml/minute
Flow
accuracy :
The greater of ± 10% or ± 0.3 ml/minute
Power
requirements :
100 – 230 V~ / 50/60Hz / 1.1 A
Gas supply :
Premixed gas. Typically 6% CO2, 5% O2, balance N2
Supply
pressure :
1.5 ± 0.15 bar
CO2 Incubator
Product Specifications
CO2 incubators are the special kinds of incubators that are provided with automatic control of CO2 and humidity. This type of incubator is used for the growth of the cultivation of different bacteria requiring 5-10% of CO2 concentration. For humidity control, water is kept underneath the cabinet of the incubator.
Technical Specifications
Temperature
range :
5K (°C) above ambient temp. up to +50 °C
Temp.
fluctuation
at +37 °C :
± 0.1 °C
Temp.
uniformity
at +37 °C :
± 0.5 °C
Humidity
control :
Up to 93%
CO2 range :
0 to 20%
CO2
uniformity :
± 0.2 % CO2
Power supply :
1300W
Cooled Incubator
Product Specifications
For incubation at temperatures below the ambient, incubators are fitted with modified refrigeration systems with heating and cooling controls. This type of incubator is called the cooling incubator. In the cooling incubator, the heating and cooling controls should be appropriately balanced.
Technical Specifications
Temperature
Range :
14°F to 176°F, -10°C to 80°C
Temperature
Uniformity :
±1.8°F, ±1°C
Temperature
Stability :
High: ±0.54°F, ±0.3°C Low: ±0.9°F, ±0.5°C
Display
Resolution :
0.1
Timer :
1min – 5999min
Electrical
Requirement :
120V 60Hz
Shaker Incubator
Product Specifications
A thermostatically controlled shaker incubator is another piece of apparatus used to cultivate microorganisms. Its advantage is that it provides a rapid and uniform transfer of heat to the culture vessel, and its agitation provides increased aeration, resulting in acceleration of growth. This incubator, however, can only be used for broth or liquid culture media.
Technical Specifications
Temperature
Range :
Ambient +5℃ ~ 80℃
Temperature
Accuracy :
±0.1℃ (@37°C)
Temperature
Uniformity :
±0.5℃ (@37°C)
Speed Range :
0 RPM, 30~300 RPM
Speed
Accuracy :
±1RPM
Timer :
0-99hr
Display :
LED
Max
Capacity :
28x50mL / 15x100mL / 11x150mL / 10x200mL / 9x250mL / 4x500mL / 2x1000mL
Ambient
Temperature :
5℃~40℃
Ambient
Relative
Humidity :
≤80%
Power
Supply :
AC110V±11V/ 60Hz
Portable Incubator
Product Specifications
Portable incubators are smaller in size and are used in fieldwork, e.g. environmental microbiology and water examination.
Technical Specifications
Supply voltage :
200-240/100-120
Temperature
range :
RT+5-50℃
Temp.
fluctuation :
±1°C
Working temp. :
5-40°C
Input power :
800
Timing :
0-9999min